We Deliver the right combination of color, texture, shape, and durable performance with ACM panels. ALUCOLOR, manufacture a wide variety of aluminium composite panels, ready to be applied to your commercial, industrial, or residential project.Our facility is dedicated to providing exceptional cladding materials
| Paint Thickness | PVDF 3 Coating ≥ 30 um Polyester Coating ≥ 16 um |
| Pencil Hardness | H |
| Toughness of Coating | 2T no Cracking |
| Temperature Resistance | - 50°C to 70°C |
| Reverse Strength Crosshatch | 50 kg cm² no pick of |
| Boiling Water Resistance | Boiling for 2hrs without change |
| Weight | 5.8 kg m² |
| Sound Absortion NRC | 0.05 |
| Sound Absortion Rw db | 25 |
| Water Absortion % by Volume | 0.01 |
| Thermal Performance R Values | 0.0012 |
| Peel Strength 180° | |
| Sound Absortion NRC | 0.05 |
| Thickness | ± 0.2 mm |
| Width | ± 2 mm |
| Lenght | ± 3 mm |
| Diagonal | ± 5 mm |
| Thermal Expansion | 2.4mm/m@100°C Temp Difference |
| Aluminium Thickness | ± 0.02 mm |
| Panel Dimensions | Any |
|---|---|
| Panel Thickness | 4 mm |
| Aluminium Thickness | 0.5 mm |
| Product Name | Grade | Composition | Total Thickness | Surface Finish | ||
| Topside Skin | Core | Backside Skin | ||||
| ALUCOLOR | 4mm | 0.5mm aluminium |
High fire- retardent core |
0.5mm aluminium | 4mm | Fluorocarbon coating polyester coating and other coatings |
| Products | Solid metals of the equivalent rigidity | |||||
| Aluminum Specific gravity: 2.71 E: 70×103 MPa or N/mm2 |
Stainless steel (304) Specific gravity: 7.89 E: 190×103 MPa or N/mm2 |
|||||
| Product | Thickness mm | Weight Kg/m2 | Thickness mm | Weight ratio | Thickness mm | Weight ratio |
| ALUCOLOR | 4 | 5.8 | 3.3 | 1.10 | 2.4 | 2.34 |
Passing mandatory requirements for exterior and interior in most countries. Though the core material does contain a small amount of combustible polyethylene, the main ingredient of the mineral does not permit the proliferation of flame and restricts the development of the smoke detrimental to the evacuation activities. On the other hand, is composed of two skins of aluminum that prevents fast spread of fire frame. Its affiliated products pass the following fire tests.
ALUCOLOR
| Category | Country | Test Standard | Specimen |
Results & Classification |
| External cladding and general |
EU | EN 13823, EN ISO 1716 EN 13501-1 |
4mm | Class A2-s1 d0 |
| Russia | GOST 30244-94 method II SNIP 21-01-97* |
4mm | G1,B1,T1,D1,K0 |
The cleaning method suitable for each material depends on the surface finish PVDF. The products finished with coatings require some cleaning methods suitable for the coatings require a cleaning method for each surface metal. The cleaning method is detailed in the technical manual of each material. The typical cleaning methods are as follows.
ALUCOLOR
The topside of these materials is a coating with paint materials. Therefore, the cleaner shall suit to these coatings.
1. General cleaning
Firstly, try water rinse using soft sponge with modest pressure to remove the stain. If the stain remains after dry, then use neutral detergents or household cleaners diluted with water. Typical cleaning procedures are as follows.
According to our test, dilute Magiclean is suitable for all finishes. Magiclean is a household detergent with pH 8 from Kao Corp. If you use other detergent, pre-test it in a small area.
2. Stubborn stain
According to our test, alkali cleaners such as Sharpshooter and Windex are applicable to strong stain, however some coatings requires good rinsing with water afterward. It is because no water rinsing may cause a color change in the future due to remaining alkali on the coating.
Note:
Sharpshooter is a versatile cleaner from 3M (alkali, pH12), and Windex is a glass cleaner from Johnson (alkali, pH11). As these are alkali solutions, prevent eye and skin contact. Follow manufacturer’s safety instructions.
If you use other strong cleaners or stain removers, pre-test in a small area. Do not use strong organic solvents, such as MEK (Methyl Ethyl Ketone), MIBK (Methyl Iso Butyl Ketone), Triclene and paint thinner. Do not use strong alkali, strong acid or abrasive cleaners. Use of these solvents and cleaners may result in the paint becoming swollen or removed.
To prevent scratching the coated surface, make sure that cleaning sponges and rags are grit-free. Avoid over cleaning or excessive rubbing.
| Products | Application | Finish | Color Variation | Reference |
| ALUCOLOR | Outdoor | Fluorocarbon coating | Solid Colors Metallic Colors Sparkling Colors Patterns | ALUCOLOR Color Chart |
Ready to start your next project with us? Give us a call or send us an email and we will get back to you as soon as possible!